Owning a zippo lighter is a bit like owning a piece of history. These lighters have been around for almost a century, and they continue to be popular today. While Zippos are known for their durability, there are some things you can do to keep your flame alive (pardon the pun). In this blog post, we will discuss the top 5 Zippo lighter repairs. We will also provide tips on how to prevent globally these issues from happening in the first place!
01: The Flint Is Worn Out of Zippo Lighter
The flint is one of the most important parts of a zippo lighter. It is responsible for creating the spark that lights the fuel. If the flint is worn out, your lighter will not work. Fortunately, this is a relatively easy problem to fix. All you need is a new flint and some sandpaper.
To replace the flint, remove the top of the lighter and empty out any excess fuel. Use a piece of sandpaper to rough up the surface of the old flint. Then, insert the new flint and replace the top. Give it a few good shakes to make sure that the flint is properly attached.
02: The Wick Is Wet
If the wick of your Zippo lighter is wet, it will not light. This can be caused by a number of things, including excess fuel and water infiltration. If you notice that your wick is wet, do not try to light the lighter! You could end up causing a fire.
Instead, remove the top of the lighter and empty out any excess fuel. Use a paper towel to dry off the wick. Then, replace the top of the lighter and give it a few good shakes. Try lighting it again. If it still doesn’t work, repeat these steps until the wick is completely dry.
03: The Fuel Tank Is Leaking of Zippo Lighter
If the fuel tank of your Zippo lighter is leaking, you will need to replace it. This is a relatively easy process, but it requires some basic tools. You will need a screwdriver, a pair of pliers, and a new fuel tank.
To replace the fuel tank, remove the screws from the bottom of the lighter using the screwdriver. Use the pliers to remove the old fuel tank. Insert the new fuel tank and replace the screws. Be sure to tighten them securely with the screwdriver. Test out your lighter and make sure that it works properly!
04: The Case Is Damaged
If the case of your Zippo lighter is damaged, it will not close properly. This can cause the lighter to become wet and/or lose its spark. If you notice that the case is damaged, you will need to replace it.
To replace the case, remove the screws from the bottom of the lighter using a screwdriver. Insert the new case and replace the screws. Be sure to tighten them securely with a screwdriver. Test out your lighter and make sure that it works properly!
05: The Spring Is Broken
The spring is responsible for keeping the top of the zippo lighter closed. If the spring is broken, it will not close properly. This can cause the lighter to become wet and/or lose its spark. If you notice that the spring is broken, you will need to replace it with a new one!
To replace the spring, remove all of the screws from underneath using a screwdriver. Insert each end of your new spring into these same holes on either side and tighten them securely with screws from underneath using a screwdriver. Test out your lighter and make sure that it works properly now!
06: The O-Ring Is Damaged
The o-ring is responsible for creating a seal between the fuel tank and the case of the Zippo lighter. If the o-ring is damaged, it will not create this seal properly. This can cause the lighter to become wet and/or lose its spark. If you notice that the o-ring is damaged, you will need to replace it with a new one!
To replace the o-ring, remove all of the screws from underneath using a screwdriver. Then, use pliers to remove both ends of the old ring from their holes on either side of the case (there is four total). Insert each end of your new ring into these same holes on either side and tighten them securely with screws from underneath using a screwdriver. Test out your lighter and make sure that it works properly now!
To replace the wick, remove all of the screws from underneath using a screwdriver. Insert each end of your new ring into this same hole on either side and tighten them securely with screws from underneath using a screwdriver. Test out your lighter and make sure that it works properly now!
Conclusion paragraph:
Whether you’re a collector or just use your Zippo lighter as part of your everyday routine, it’s important to know how to properly maintain and repair it so that the flame stays alive. By following these simple tips, you can keep your lighter working like new for years to come. Have you ever had to repair your Zippo lighter? If so, what method did you use? Let us know in the comments below.